Guida: Bios RECOVERY

marzo 3, 2008 at 8:49 pm (Guide) (, , , , , )

 
BIOS Recovery
AMI BIOS

  
 AMI has an embedded recovery technique in the ‘boot block’ of the BIOS. In the event that the BIOS becomes corrupt the boot block can be used to restore the BIOS to a working state. The routine is called when the ‘system block’ of the BIOS is empty or corrupt. The restore routine when called will access the floppy drive (1.44Mb floppy disk drive) looking for a file named AMIBOOT.ROM. This is the reason the floppy drive light comes on and the drive appears to be in use. If the file (AMIBOOT.ROM) is found it is loaded into the ‘system block’ of the BIOS to replace the corrupted information.To restore your BIOS copy the most recent version of your motherboards BIOS file to a floppy diskette and rename it AMIBOOT.ROM. The diskette does not need to be bootable or contain a flash utility. It will access the floppy from 2-5 minutes the system will beep four times. Remove the floppy diskette from the drive and reboot the computer. if when you turn on the system it does not try to access the floppy, press and hold the ‘CTRL’ and ‘HOME’ keys at the same time. This will force the system (assuming the ‘boot block’ isn’t corrupted) to access the flopy and look for the AMIBOOT.ROM file.Step by Step:

 

Leggi il seguito di questo post »

Annunci

Permalink Lascia un commento